|
|
|
Technical: Secondary Containment Overview
All Tech Industries offers two methods for Secondary Containment. The first method uses a spray-applied coating product (Ultra COAT™), which adheres to a Geotextile (included in the solution cost).
The second method uses a spray-applied coating product (Ultra COAT Composite 1.0™ or Ultra COAT Composite 3.0™), which injects fiber carbon with the ATI coating product, thus eliminating the
need for a Geotextile and offers tensile strengths unsurpassed in the marketplace (up to 13,000 psi). We also offer as an option, a computer controlled Leak Detection System with our Secondary
Containment solutions.
The containment area typically consists of metal or earthen support walls (berms) which form the basis of the perimeter. A layer of Geotextile is then applied over the containment area and
the support walls. The All Tech Industries coating product (i.e. Ultra COAT™) is then spray-applied over the Geotextile fabric at a thickness of 60 mils. The coating forms a seamless, leak-free
area and bonds the supports walls with the Geotextile fabric. The storage tanks are typically set within the new containment area the same day as the All Tech Industries coating system installation.
We do not know of another Secondary Containment Solution available in the marketplace that can sustain extreme environments (heat, cold, wind, snow, ice) and physical rigors imposed by personnel
and equipment like the All Tech Industries applied Secondary Containment Solution.
|
 |
Click the .pdf icon to see sample diagrams on some of our containment options for below grade tanks. |
|
|
|
|
Click the .pdf icon to see sample diagrams on some of our containment options for above grade tanks. |
|
|
|
|