OurCompany    Media Center    Containment Systems    Sealants & Coatings    Thermal    Acoustic    Support  

Our Company
Home
Contact Us
Dealer Locator
Dealer Opportunities
News
MediaCenter
Videos
Containment
Sealants Gallery
Thermal Gallery Com
Thermal Gallery Res.
Slide Show
PDF Brochures
Interactive CD-ROM
Decibal (dB) Demo
Indoor Air Quality
Thermal Envelope
Test Your Knowledge
Containment Systems
Welcome
News
Projects Gallery
FAQs
Poly-X
Comparisons
PDF Brochures
Repair Services
Supplies & Equipment
Leak Detection
Tank Bottom Savers
Sealants & Coatings
Welcome
News
Poly-X
FAQs
Advantages & Benefits
Applications
Colors
Comparison
Chemical Resistance
Definition
Equipment
History
Projects Gallery
PDF Brochures
Performance Chart
Pipeline
Roofing
Thermal
Welcome
3 Factors to Consider
Advantage Program
Architect Commercial
Architect Residental
Building Science
Case Studies
Cellulose
Corrosion
Energy Savings
FAQs - Cellulose
FAQs - Spray Foam
Fire Safety
Gallery Commercial
Gallery Residental
Healthy Home
Hotbox
News
Recycled
R Values
R Value Myth
R, K, C, & U Factors
Spray Faom
Steel Structures
Testimonials Builder
Testimonials Res.
Thermal Envelope
Vapor Retarders
Wall Strength
Questionnaire
Remodeling
Remodel Advantage
Acoustic
Welcome
Applications
FAQs-Architectural
FAQs-Basic
Acoustic Properties
Decibal (dB) Demo
Decibel (dB) Levels
Insulation * Absorption
Sound Proofing Myths
News
PDF Brochures
Peace-of-Mind
Support
Contact Us
PDF Brochures
News index
Glossary
Home
Site Index
Site Navigation Tips
Dealer Locator
Dealer Opportunities
Building Science
Code Resources
Industry Links

Common Sound Proofing Myths

 

As a service to those doing their own analysis, noise control planning and soundproofing, we've prepared this list of "Don't"'s.  We can't explore every aspect of doing a soundproofing job, but avoiding certain materials and processes can save you lots of time and money.  Don't waste time and money on ineffectiveness.  If you have a lot of  time and wish to experiment, please do so!  (and let us know how it comes out!).  Many people have made the errors mentioned here and some have been kind enough to pass them on to us for inclusion. 

Some common materials to avoid are:

  • common "Eggcrate" cardboard egg holders.  You have no idea the number of people who tell us their trials and tribulations to find quantities of it, buy it and install it only to find it does little or no soundproofing! This appears to be because it is frequency "holy".  That is, it has characteristics where sound at certain frequencies passes freely through it!  Some have told us that some sound transmission appears to be somewhat enhanced!

  • rubber floor mat.  One would think a rubber material would be a good sound proofing agent and perhaps it is if properly used, but simply laying it on the floor will do little against noise coming in (or going out).

  • old mattresses nailed to the walls.  This technique has it's followers, but unless butted well together with no spaces, caulked edges, and only if you are willing to put up with the possible odor, mold and moisture they have or can accumulate, not to mention unwanted rodent critter type "guests" that may take up residence - are they a possibility.

  • carpet - Old or New.  Doesn't make much difference, it will all deteriorate and begin to stink.  The newer will take longer, that's all.  Same problems as with the Mattress as explained above. Carpet WILL increase the acoustic absorbency of a room, but do little in the way of soundproofing.

  • plywood panels are not good for soundproofing as wood transfers sound very well.    

  • Now, our favorite -  fiberglass insulation: makes for a poor thermal insulator compared to spray foam insulation and it is not a good acoustical insulator as well. Read how fiberglass insulation is hyped, but don't believe it!

Contact an All Tech Industries engineer today (989-826-9999) for a deeper discussion about your specific acoustic requirements.